Tantalum metal is like a blob of metallic putty. Tantalum is very soft, and it is highly ductile. Numerous attempts at producing tantalum balls by our would be competitors have ended up with a layer of foreign particulate that is embedded in the outer surface. Special procedures must be employed to prevent these particles of abrasive and fragments of the grinding tools from migrating into the surface of balls made of tantalum.
Bal-tec Division of Micro Surface Eng., Inc. is a custom ball manufacturing facility that has been in operation for more than 53 years. We occupy 35,000 square feet in an industrial section of Los Angeles California, USA.
There are always more than one hundred individual lots of precision balls in production at any given time. With this large number of relatively small lots of precision balls being produced, our deliveries are fast, and our costs are very modest.
In addition to our manufacturing prowess, we have an extraordinary computer controlled quality control system with an extensive array of expensive and in some cases totally unique laboratory measuring equipment. This system is available to assure and document the quality of our finished products.
We use a Talyrond machine to measure and document the roundness of our balls |
This is a ( bad ) example of the polar chart produced
on the Talyrond. The inner poly lobular trace was made from a competitor's silicon nitride ball that was rated by them as a grade 10. The outer trace was made from a very good quality ball. |
 |
 |
Precision spheres used for medical applications include balls or beads used as radiographic targets. These balls define the three dimensional position of an area of interest.
The target balls or beads are usually made of either gold or tantalum. The desirable properties here are good radiographic opacity and bio compatibility. The diameter of these target balls or beads is usually either 0.020 inches (0.5mm) or one millimeter, i.e. 0.040 inches. Tantalum balls of any desired size can be produced. These balls or beads require a good sphericity and a well-defined diameter.
Balls or beads are used for orthopedic markers.
Orthopedic marker balls or beads are always made of tantalum. This material provides excellent radiographic opacity and good bio compatibility. This material has adequate mechanical properties to withstand the impact of insertion.
We have made tantalum balls or tantalum beads for medical applications from 0.014” (0.36mm) to 2mm (0.080 inches), but there are no real size limitations except the availability of the raw material. Small quantities of some sizes of Tantalum balls are available from stock. Present delivery of production quantities is six to eight weeks based on the current lead-time of the raw material.
Precision balls are used as a closer for medical devices.
Titanium closure balls, for medical apparatus, are usually made of medical grade 2 or of the 6AL4V alloy titanium metal. These small diameter, very precise closure balls are press fit into the openings of a medical device that is ultimately implanted into the human body. The compressive stresses imparted to the ball by press fitting it into an under-sized hole lowers the melting temperature of these balls. This lower temperature melting point helps to localize the liquid phase to the area immediately adjacent to the site of the ball. The fusion or melting process usually incorporates a laser heat source. Closure balls are usually one millimeter in diameter, but they can be made in any diameter to suit specific applications.
Inventory of Available Tantalum Balls
Email us at info@precisionballs.com or call us at (800) 322-5832 for more information.
Marker Balls ker Beads
Medical Closure Balls
Medical Marker Balls
Medical Marker Beads
Medical Target Balls
Tantalum Marker Balls
Tantalum marker beads
Tantalum target beads
Target Balls
marker ball
marker bead
medical closure ball
medical marker ball
medical marker bead
medical target ball
tantalum ball
tantalum marker ball
tantalum marker bead
tantalum target bead